*Updated* Dyno Day @ S.T. Motorsports on April 11th 2010

Dyno Day @ S.T. Motorsports on April 10th.

it will be $45 for 3 pulls on the dyno with your Hp/Tq and afs on the printout.
there will be pizza and drinks.


ST Motorsports
380 S. I ST.
San Bernardino CA 92410
starts at 10am til the last car is done..........


#1 S R T 4
#2 Crazy1
#3 mark2249
#4 whitey2411
#5 springvalleysrt4
#6 panchosrt4
#7 mysrt48u
#8 nutz
#9 jnathan68
#10 elias
#11 srtred1
#12 master_101
#13 speed_box
#14 SRT44LIFE
#15 04srt-4's!nEvErHiDe!
#16 Colin1337
#17 SNOOPALOOP
#18 SRT*MIKE
#19 CRZYCUBAN2
#20 05_ACR_SRT4
#21 Savior1974
#22 redrider54 CSRT4
#23 UncagedChipmunk CSRT4
#24 icemanthrilla CSRT4
#25


main thread from the SRTforums
http://www.srtforums.com/forums/f110/dyno-day-s-t-motorsports-april-10th-2010-a-558085/

if you have any ?s hit me or Hugo (crzycuban2) up

hope to see some CSRT4s out there

I'll be there.

I might be there depending if I can get my clamp wired in and tuned. A bit worried because I see a spike of 1.7 or so @ 3500. Doesnt matter what gas station I use. Kinda worried about clamping it if I already have that much ST Knock

^91 octane man!

we just wont be able to get the kinda boost everyone else is unless u get meth.

ask cuban.


im gonna try hard to make it.........this is happening during business hours!!!! boo.

I might be there depending if I can get my clamp wired in and tuned. A bit worried because I see a spike of 1.7 or so @ 3500. Doesnt matter what gas station I use. Kinda worried about clamping it if I already have that much ST Knock


what are you trying to boost?

I'll be there.


see ya there man


:beerchug:

I might be there depending if I can get my clamp wired in and tuned. A bit worried because I see a spike of 1.7 or so @ 3500. Doesnt matter what gas station I use. Kinda worried about clamping it if I already have that much ST Knock

^91 octane man!

we just wont be able to get the kinda boost everyone else is unless u get meth.

ask cuban.


im gonna try hard to make it.........this is happening during business hours!!!! boo.


i added you 2 to the list

what are you trying to boost?

Might sound pointless to most but I'm running to run the stock 15psi MS1 gives you...."BUT" without the torque limit kicking in. Not really looking to boost any higher while clamped.

So far I'm running off my AGP wastegate for boost (set a 15/15.5 spike to 15 hold) but at 3500 @ WOT i see 1.7 ST KNOCK sometimes depending on the weather 2.0+ which I let out but makes me highly doubt to clamp.

Might sound pointless to most but I'm running to run the stock 15psi MS1 gives you...."BUT" without the torque limit kicking in. Not really looking to boost any higher while clamped.

So far I'm running off my AGP wastegate for boost (set a 15/15.5 spike to 15 hold) but at 3500 @ WOT i see 1.7 ST KNOCK sometimes depending on the weather 2.0+ which I let out but makes me highly doubt to clamp.


So you youre running s1 boost and your getting knock? What brand of gas do you put in? Are you on pcm controlled boost or did you delete the solenoids?

So you youre running s1 boost and your getting knock? What brand of gas do you put in? Are you on pcm controlled boost or did you delete the solenoids?


sounds like bad gas.

have you tried any race gas to see if it takes the Kn away.

So you youre running s1 boost and your getting knock? What brand of gas do you put in? Are you on pcm controlled boost or did you delete the solenoids?

Yes running 15psi off the AGP wastegate. (NO PCM control). Plugs are gapped 30-32. I'm more certain they are 30 since I had the last ones at 32 and hoped that the knock would go away with a smaller gap. Nope

As far as gas it doesn't matter which brand I put in. Chevron, Mobil 1, Shell, 76 Stations. I never go to the cheap ol' mom and pop stations for any vehicles.

sounds like bad gas.

have you tried any race gas to see if it takes the Kn away.

No I have not, but there is this one gas station about 30 miles that sells 100 octane right out of the pump. But obviously pretty pricey.

Yes running 15psi off the AGP wastegate. (NO PCM control). Plugs are gapped 30-32. I'm more certain they are 30 since I had the last ones at 32 and hoped that the knock would go away with a smaller gap. Nope

As far as gas it doesn't matter which brand I put in. Chevron, Mobil 1, Shell, 76 Stations. I never go to the cheap ol' mom and pop stations for any vehicles.



No I have not, but there is this one gas station about 30 miles that sells 100 octane right out of the pump. But obviously pretty pricey.
add some 100 and see what happens.

worth a try atleast IMO

Yeah man try some 100 in there ans see what how she does.

Will try it out today

Results:


.............WOT @ 3500 RPM


..........................100 Octane.................................91 Octane

Boost:.....................14Psi.................. .......................15Psi

Knock:.......................0.................... ......................0.3-2.0+

Throttle %:.........60 slowly rising.........................87 entire rpm band

Weather:..................80F..................... ........................80F

Results:


.............WOT @ 3500 RPM


..........................100 Octane.................................91 Octane

Boost:.....................14Psi.................. .......................15Psi

Knock:.......................0.................... ......................0.3-2.0+

Throttle %:.........60 slowly rising.........................87 entire rpm band

Weather:..................80F..................... ........................80F
where did u find 100 octane??? i want i wantt!!
It takes the pcm awhile to adapt to the change in octane so results might differ if 100 octane is continued:banger::banger:

Results:


.............WOT @ 3500 RPM


..........................100 Octane.................................91 Octane

Boost:.....................14Psi.................. .......................15Psi

Knock:.......................0.................... ......................0.3-2.0+

Throttle %:.........60 slowly rising.........................87 entire rpm band

Weather:..................80F..................... ........................80F

weird it pulled the throttle like that

did you reset the PCM before or na?

where did u find 100 octane??? i want i wantt!!
It takes the pcm awhile to adapt to the change in octane so results might differ if 100 octane is continued:banger::banger:
search your area, im sure you can find some

#1 S R T 4
#2 Crazy1
#3 mark2249
#4 whitey2411
#5 springvalleysrt4
#6 panchosrt4
#7 mysrt48u
#8 nutz
#9 jnathan68
#10 elias
#11 srtred1
#12 master_101
#13 speed_box
#14 SRT44LIFE
#15 04srt-4's!nEvErHiDe!
#16 Colin1337
#17 SNOOPALOOP
#18 SRT*MIKE
#19 CRZYCUBAN2
#20 05_ACR_SRT4
#21 Savior1974
#22 redrider54 CSRT4
#23 UncagedChipmunk CSRT4
#24 icemanthrilla CSRT4
#25

Thats weird that its pullin throttle. And it doesnt take away for the pcm to get used to it. If Im on empty and put 100 I can totally tell the difference right away!

I had less than a quarter of a tank...pretty close to "E" But it sure didn't seem faster, probably since its pulling throttle. I'm sure your car being clamped makes the difference why you feel it right away.

Mole, no I didn't reset the PCM

Ya need to bring it out this way so I can take a look.

As for the dyno day, Im plannin on being there EARLY. Does anybody want to meet up with me before hand and roll in together?

I got a buddy that has a 1968 Chrysler Imperial 440 that wants to dyno his name is Bryan he will be coming too.

wish i was in cali for this event it would be fun

*****ATTENTION ALL********

The dyno day has been pushed back to the very next day Sunday, April 11th. Owner of the shop had something come up and it had to be moved. I still will be attending and willing to meet up with any of you guys that want to roll in together. Just let me know.

Bump! Alright whos all going and who wants to meet up with me early and roll in together? Just a little over a week to go!

Bump again!






****REMINDER**** It has been pushed back a day, to Sunday the 11th.****


So whoever is going, please post up so I know who is all coming. Thanks.

Work Sundays = No bueno....once again. Sorry

Damn. Alright bro.

Bump again!






****REMINDER**** It has been pushed back a day, to Sunday the 11th.****


So whoever is going, please post up so I know who is all coming. Thanks.
changed the title for you :bigthumb:

changed the title for you :bigthumb:


Thanks bro.:bigthumb:

I'm going to try and go. I have to see if i can get it off. I'm not clamped but i would like to see what numbers I'm putting down?

I'm going to try and go. I have to see if i can get it off. I'm not clamped but i would like to see what numbers I'm putting down?


Shoot me a pm with your number. :bigthumb:

Maybe you can help me tune my RT clamp once I get in my PnP harness

Maybe you can help me tune my RT clamp once I get in my PnP harness


Yeah man anytime. When you getting it? Are you coming to the dyno day?

Still waiting on the package. Info has been sent to the carrier just waiting for the package to be dropped of to be scanned then mail to me.

Nope wish I could but I work Sundays. I usually have Thur and Fri's off.

Still waiting on the package. Info has been sent to the carrier just waiting for the package to be dropped of to be scanned then mail to me.

Nope wish I could but I work Sundays. I usually have Thur and Fri's off.


Oh ok cool. Just let me know.

Got my harness in today

Got my harness in today

From where to where does that go?

Its going to go inline with the Map and Tip connectors. I will make a how-to if it works on my next days off. I'll keep you updated bro. I got your number :bigthumb: