Dodge Caliber Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I have a 2010 caliber 2.0., Engine had loud growling noise. I took of belt and completely quiet. Bought a gates belt/ pully kit and installed. Belt would not go on (too short). The kit had 2 different size pulleys. after hours of trying thought maybe tensioner was on upside down so turned it around. Belt was able to be forced on . Noise is much better but belt is way to tight probably pressure on pulleys. Alternator, ac, power steering, water pump turn smooth. I already stripped bolt on new tensioner and put old one on with new pully that turns smooth. Please help I am about to give up and junk car
 
1 - 1 of 1 Posts
Top