Dodge Caliber Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
109 Posts
Suspension Components

Good day everyone,

Would it be possible for someone to post some diagram/picture of the suspension, because I have the torque specs of all the suspension components but I want to tight evrything but I am not sure what is a toe link, strut clevis to knuckle etc.....

Thank for your help guys

Paolo
 

· Registered
Joined
·
109 Posts
WOW!

Thanks Grease, I am sure that this might help a lot of people!

Mod should sticky That!

And that's from another Thread from EssOurTeaFour:


Front Suspenion Torque Specs in Ft-Lbs.

Hub And Bearing Mounting Bolts - SRT4 60

Hub Nut 180

Lower Ball Joint Stud Pinch Bolt 60

Lower Control Arm Front Pivot Bolt (Built up to 8/1/08) 100

Lower Control Arm Front Pivot Bolt (Built After 8/1/08) 118

Lower Control Arm Rear Pivot Bolt 135

Stabilizer Bar Cushion Retainer Screws 22

Stabilizer Bar Link Nuts 43

Strut Clevis-to-Knuckle Nuts 81

Strut Rod Nut 44

Strut-to-Tower Nuts 35

Tie Rod Adjuster Jam Nut 55

Tie Rod End-to-Knuckle Nut 97

Wheel Mounting (Lug) Nuts 100



Rear Suspenion Torque Specs in Ft-Lbs.

Hub And Bearing Mounting Bolts 77

Hub Nut 181

Lower Control Arm Trailing Link Bolt Nut 70

Lower Control Arm Crossmember Mounting Bolt Nut 70

Shock Assembly Lower Mounting Bolt Nut 73

Shock Assembly Upper Mounting Nuts 35

Shock Rod Nut 18

Stabilizer Bar Cushion Retainer Screws 25

Stabilizer Link Mounting Nuts 43

Toe Link Trailing Link Mounting Bolt 70

Toe Link Mounting Cam Bolt Nut 26

Trailing Link Body Mounting Bolts 81

Upper Control Arm Trailing Link Bolt Nut 70

Upper Control Arm Crossmember Mounting Bolt 70

Wheel Mounting (Lug) Nuts 100
 
1 - 2 of 2 Posts
Top